Flow | 0.25 M3/Hr. - 50 M3/Hr. |
Pre Filters | PP & SS with 5 Micron cartridges |
High Pressure Pumps | Vertical in line SS 304 & 316 |
Pre Filter | Cartridge Filter of 5 Micron |
Membranes Housing | FRP / SS |
RO Skid | MSEP / SS |
Inlet TDS | Up to 10000 Mg/L for brackish water up to 35000 Mg/L for Sea Water |
Outlet TDS | 98% Rejection |
Flux Rate | Varies from 15 LMH to 30 LMH |
Temperature | 25 degree Celsius |
Type of Membranes | Energy efficient Polyamide |
SDI | Less Than 3 at inlet |
Controls | Microprocessor / PLC |
Flow Monitoring | Rota meter / Digital Flow Meters. |
Industrial 1000 LPH FRP RO Plant is widely used for removal of dissolve chemical impurities from brackish & seawater. Reverse osmosis is the process of forcing a solvent from a region of high dissolve solids concentration through a membrane to a region of low dissolve solids concentration by applying a pressure in excess of the osmotic pressure.The semi permeable membranes used for reverse osmosis have a dense polymer barrier layer in which separation takes place. Shubham RO Plants are designed for a variety of industrial & commercial applications requiring high quality equipment with a fast delivery and competitive price. These pre-engineered, pre-assembled and factory tested units minimize installation and start-up time. With simple utility connections and easy to set up controls, the unit is ready for quick on-line service. The control system is an advanced microprocessor based system that is very easy to use. Shubham RO Plants are available in flowrates from 0.25 M3/hr. to 100 M3/hr. Using high quality 4 and 8 inch semipermeable membrane and equipment’s for variety of applications.
Working Principal:
Reverse osmosis is water purification process in which pre-treated & filtered water is connected to the high-pressure pump where pressure is developed and fed to the RO membranes.Reverse Osmosis membranes work on the Cross flow Filtration method where the salts get rejected partially and deliver pure water. Purified water is referred to as product and waste water is referred to as concentrate or reject. The percent of water delivered as product is called the recovery. The ratio of recovery& output parameters depend upon the feed water quality, type of membrane, temperature and total RO unit design considerations.
Salient Features:
Advantege:
Type of WasteBiodegradableService LocationCommercialAutomatic GradeManualTreatment Techn... Continue
Automatic GradeAutomaticType Of Machinesjar washing machine,Water Purification System,Bottling Machine,Pouch Pa... Continue
Water SourceOpen Well waterMaterial of ConstructionSSCapacity (litres per hour)2000-3000Number Of Filtra... Continue
Flow Rate50 to 1000 Lit/hr.Space Requirements3 ft. x 3 ft.Power0.5 kg/cm2Output TDSLes... Continue
Automatic GradeAutomaticFlow0.25 m3/Hr - 50 m3/HrTemperature25 Degree CelsiusType of MembranesEnergy Ef... Continue
Capacity5, 000L Per HourAutomatic GradeAutomaticMaterialStainless SteelPhaseThree Phas... Continue
Owing to our enriched industrial experiences, we are devoted towards trading a wide variety of excellent quality 1000 LP... Continue
Control PanelWith Control PanelInstallation/Civil WorkInstallation AvailableBottle Filling Capacity30 Bottle... Continue
Water Storage Capacity6000Type Of Purification PlantsReverse OsmosisWater SourceBorewell WaterCapacity In... Continue